Yagi LTE/GSM-antenni Poynting A-LPDA-0500-V1-01 11 dBi, ulkokäyttöön, suunta-antenni, tukee WiFi 6 -taajuuksia

Directional Yagi LTE/GSM antenna Poynting A-LPDA-0500-V1-01 with 11 dBi gain is designed for outdoor use to improve mobile network reception where cellular signal is weak. This model focuses radio energy in a specific direction to extend coverage and increase link stability. It is compatible with LTE and GSM frequency ranges and also supports frequencies used by WiFi 6, making it suitable for installations that combine cellular and wireless backhaul or require improved throughput on frequency bands overlapping with WiFi 6.

Advantages

The antenna's 11 dBi directional gain increases signal strength toward a chosen base station while reducing interference from other directions. Its Yagi design provides stable front-to-back performance ideal for fixed outdoor mounting. Designed by Poynting, the model is intended for straightforward integration with outdoor router and modem setups that require a focused radiation pattern and improved cellular reception over a longer distance. Support for frequencies used by WiFi 6 adds flexibility for mixed-use deployments.

Suitable for

• Improving LTE/GSM reception at remote or signal-weak locations
• Directional installations for fixed wireless routers and modems
• Outdoor mounting on poles or building facades to aim at a distant base station
• Mixed deployments where cellular connectivity and WiFi 6 frequency support are required

Key specifications

• Type: Outdoor directional Yagi antenna
• Gain: 11 dBi
• Supported technologies: LTE, GSM; supports frequencies used by WiFi 6
• Intended use: Fixed outdoor installations for enhanced cellular reception
• Radiation pattern: Directional (focused beam)

How to use

Mount the antenna outdoors on a mast, pole or building facade with a clear line of sight toward the target cellular base station. Align the antenna by pointing the main lobe in the direction of the desired signal source and secure all mounting hardware. Connect the antenna to your router or modem using appropriate low-loss coaxial cable and compatible connectors, ensuring cable runs are weather-protected and properly grounded where local codes require. After installation, perform signal measurements and fine-tune the azimuth to achieve optimal reception.

Recommendations

Place the antenna at the highest practical outdoor location with minimal obstructions and avoid pointing it toward sources of strong interference. Use weatherproof cables and conduit for outdoor cable runs, and verify connector compatibility with your router or modem. For best results when combining cellular and WiFi 6 frequencies, check your device's supported bands and choose cable lengths that minimize loss.