Cudy POE200 PoE-sovitin Gigabit Ethernet 54 V 30 W

The Cudy POE200 PoE adapter provides Gigabit Ethernet connectivity with 54 V output and up to 30 W power, compatible with IEEE 802.3af and IEEE 802.3at devices. Its compact black enclosure (121 × 50 × 36 mm) includes LED indicators for PoE and power status and two RJ-45 ports to connect powered and data devices in small office or home installations.

Advantages

The adapter delivers stable PoE power up to 30 W and supports Gigabit Ethernet data rates (10/100/1000 Mbps), ensuring compatibility with IP cameras, Wi‑Fi access points and VoIP phones. Compliance with IEEE 802.3af/at standards simplifies deployment and interoperability. The compact form factor and LED indicators make installation and status checks straightforward.

Suitable for

• Powering IP cameras for surveillance in homes and small offices
• Supplying VoIP phones for business conference systems
• Providing PoE to Wi‑Fi access points to extend office wireless coverage

Key specifications

• Model: Cudy POE200
• Power output: 54 V, up to 30 W
• Standards: IEEE 802.3af, IEEE 802.3at compatible
• Ethernet: Gigabit Ethernet (10/100/1000 Mbps)
• Ports: 2 × RJ-45
• Dimensions: 121 × 50 × 36 mm
• Colour: Black
• Indicators: PoE and power LEDs

How to use

Connect the injector's data input port to your network switch or router and connect the PoE output port to the powered device (IP camera, VoIP phone, or Wi‑Fi AP) using a standard Ethernet cable. Ensure the powered device supports 54 V PoE (IEEE 802.3af/at). Power the adapter from a suitable mains outlet; confirm LED indicators for power and PoE activity before relying on the device in production.

Recommendations

Use shielded or category‑rated Ethernet cables (Cat5e or higher) for reliable Gigabit performance. Verify device power requirements to avoid under- or over‑powering; for installations in exposed or high-temperature environments, provide adequate ventilation and avoid placing the adapter in direct sunlight.