DeLOCK sovitin USB 2.0 Type-A sarjaporttiin RS-422/485 uros 6-pin-liitinsrima 0,5 m

The DeLOCK Adapter USB 2.0 Type-A to Serial RS-422/485 (MPN 64267, EAN 4043619642670) converts a USB Type-A port into a serial interface with support for RS-422 and RS-485. It includes a 6-pin male terminal block and a 0.5 m cable, providing a compact solution for connecting measuring instruments, POS systems, printers, modems and IoT devices to a USB-equipped host.

Advantages

The adapter offers reliable USB 2.0 data transfer and supports both RS-422 and RS-485 standards through a removable 6-pin terminal block suitable for solderless cable connections. Its compact cable (0.5 m) and ability to be installed in PC housings make it practical for confined installations, and the terminal block can optionally deliver 5 V power to connected external devices.

Suitable for

• Connecting measuring devices to a computer via RS-422 or RS-485
• POS systems and receipt printers requiring serial communication
• Modems and industrial controllers with serial interfaces
• IoT devices that need serial-to-USB connectivity

Key specifications

• Manufacturer: DELOCK
• Model / MPN: 64267
• EAN: 4043619642670
• Interface: USB 2.0 Type-A to Serial (RS-422/RS-485)
• Connector (host): USB Type-A
• Connector (device): 6-pin male terminal block (serial)
• Cable length: 0.5 m
• Product colour: Transparent, Black

How to use

Connect the USB Type-A plug to an available USB port on the host computer. Attach the serial wiring to the 6-pin terminal block according to the RS-422 or RS-485 pinout required by your device. If external devices require power, enable the optional 5 V output from the terminal block where supported. Install any necessary drivers on the host system to enable serial communication over USB, then configure port settings (baud rate, parity, data bits, stop bits) in your application or operating system.

Recommendations

For stable serial communication, use shielded cabling where possible, verify correct wiring for RS-422 versus RS-485 modes, and confirm driver compatibility with your operating system before deployment.