DVI-kaapeli ShiverPeaks 77442-SPP 2 m DVI-D sininen

The ShiverPeaks 77442-SPP 2 m DVI-D Blue cable is a two‑metre digital video link designed for direct connection between DVI‑D equipped devices. It carries a single‑link or dual‑link DVI‑D signal depending on device support, enabling uncompressed digital transfer of video data for monitors, projectors and other display equipment. The cable has DVI‑D connectors on both ends and a visible blue jacket for easy identification in cable runs.

Advantages

This DVI cable offers stable digital video transmission with minimal signal degradation over its 2 m length, supporting clear and sharp image reproduction on compatible displays. Its molded connectors and reinforced jacket improve mechanical durability for frequent plugging and routing, while the blue outer sheath helps with cable management and visual identification in multi‑cable setups.

Key specifications

• Cable length: 2 m
• Connector type: DVI‑D to DVI‑D
• Signal type: digital video (DVI‑D)
• Colour: blue outer jacket
• Construction: molded connectors with reinforced jacket

How to use

Connect one DVI‑D connector to the DVI‑D output of your source device (such as a graphics card or media player) and the other connector to the DVI‑D input on the display device. Ensure connectors are aligned before inserting to avoid bending pins. For the best image quality, keep the cable run free of sharp bends and away from strong electromagnetic interference sources.

Recommendations

Use this 2 m DVI‑D cable for direct, short to medium length connections where a dedicated digital video link is required. If you encounter display issues, verify that both source and display support DVI‑D, check connector seating, and try a different input or cable length to rule out device limitations.