HDMI-jakaja ShiverPeaks 1x tulo 2x lähtö 4K 60Hz

The ShiverPeaks HDMI splitter 1x in 2x out 4K 60Hz duplicates a single HDMI source to two HDMI displays simultaneously while preserving the source resolution and refresh rate. Designed for home, office and retail environments, this compact device accepts one HDMI input and provides two identical HDMI outputs so the same video and audio content can be shown on two TVs, monitors or projectors without signal switching.

Advantages

This HDMI splitter supports 4K resolution at 60Hz, ensuring high-definition image quality on both outputs and maintaining the original frame rate of the source. The unit duplicates both video and embedded audio, enabling synchronized playback on two screens. Its plug-and-play operation requires no software or driver installation, and the compact housing is suitable for simple integration into AV setups where reliable, simultaneous distribution is needed.

Suitable for

• Duplicating a single media player, set-top box or computer to two TVs or monitors
• Presentations in meeting rooms where the same content is shown on a display and projector
• Retail and signage installations that require identical content on multiple screens
• Home entertainment setups where a console or streamer must feed two displays

Key specifications

• Input/Output configuration: 1 HDMI input, 2 HDMI outputs
• Maximum resolution: up to 4K (3840 x 2160) at 60Hz
• Video format support: standard HDMI video formats up to 4K60
• Audio support: embedded HDMI audio passed through to both outputs
• Operation: plug-and-play, no driver required
• Compatibility: works with TVs, monitors and projectors that accept HDMI input

How to use

Connect the HDMI source device (such as a Blu-ray player, streaming box or PC) to the splitter's HDMI input using a compatible HDMI cable. Then connect HDMI cables from the splitter's two outputs to the target displays. Power the splitter if an external power source is required (check the unit's power connector), and set each display to the appropriate HDMI input. The splitter mirrors the input signal so both displays show the same image and audio without further configuration.

Recommendations

For reliable performance at 4K60, use high-quality HDMI cables rated for 18 Gbps or higher and keep cable lengths within recommended ranges (shorter runs reduce signal degradation). If one display does not show the expected resolution, verify the source device's output settings and the display's supported resolutions. Avoid using multiple adapters or converters between the source and splitter to reduce compatibility issues.