Kuituverkkokaapeli EFB Elektronik O0937.15 — OS2, 15 m, E-2000 (LSH) - LC, 9 µm, täysduplex, keltainen

EFB Elektronik O0937.15 is a 15 m single-mode fibre optic cable with OS2 attenuation class, equipped with an E-2000 (LSH) connector on one end and an LC connector on the other. The cable uses a 9 µm core diameter optical fibre and supports full duplex transmission, making it suitable for reliable point-to-point optical links and long-distance connections in structured networks and data centre environments.

Advantages

This OS2 single-mode cable provides low-loss transmission and stable optical performance over longer distances compared with multimode alternatives. The combination of an E-2000 (LSH) connector and an LC connector offers compatibility with professional network equipment and patch panels. The 15 m length balances reach and installation flexibility, while the yellow jacket makes the cable easy to identify in structured cabling installations.

Suitable for

• Interconnecting equipment in data centres and server rooms
• Long-distance single-mode links in enterprise networks
• Connecting transmission equipment with E-2000 and LC ports
• Patch-panel to active-device optical connections

Key specifications

• Optical type: single-mode (OS2)
• Length: 15 m
• Connector A: E-2000 (LSH)
• Connector B: LC (single fibre connector)
• Fibre core diameter: 9 µm
• Transmission: full duplex
• Jacket colour: yellow

How to use

Inspect connector endfaces before installation and clean if necessary to prevent signal loss. Route the cable along existing cable management paths, avoiding sharp bends and excessive tension to preserve the fibre integrity. Plug the E-2000 (LSH) connector into the corresponding port and secure the LC connector into the mating LC socket until it clicks. Verify link status using optical test equipment or network diagnostics and confirm expected optical power levels and continuity.

Recommendations

Store unused cable coiled with a bend radius that complies with manufacturer limits and avoid kinks. For permanent installations, use strain relief and proper routing in trays or ducts. Use appropriate cleaning tools for E-2000 and LC connectors and perform optical loss testing after installation to ensure compliance with link budget requirements.