LEONI Kerpen LEONI kuitu-kaapeli 9µm OS2 Suhner LC/LC 15m - kaapeli - 15 m

High-bandwidth data centers and enterprise networks demand fiber optic links that maintain signal integrity over distance. The LEONI Kerpen OS2 LC/LC Duplex Single-Mode Fiber Patch Cable delivers exactly that: a 15-meter, 9µm core single-mode connection with ultra-low insertion loss and bend-insensitive performance, ensuring stable 10G/40G/100G Ethernet links without costly re-termination or signal degradation.

Who is it for

Network engineers, data center technicians, and IT integrators who need a dependable, plug-and-play single-mode patch lead for backbone connections, SAN environments, or high-speed inter-switch links. This cable suits any project where OS2 compliance and LSZH safety are mandatory.

Main features

• OS2 single-mode fiber with 9µm core and 125µm cladding for long-reach, high-bandwidth transmission.
• LC duplex to LC duplex connectors with UPC polish for low insertion loss (<0.3 dB typical) and high return loss (>50 dB).
• 15-meter length ideal for patching between active equipment and fiber distribution panels in racks or across rooms.
• Yellow LSZH (Low Smoke Zero Halogen) jacket reduces toxic smoke and corrosive gas in case of fire, meeting strict building codes.
• Bend-insensitive design with minimum bend radius of 30mm, preventing signal loss in tight cable management spaces.
• Supports 10GbE, 40GbE, and 100GbE applications, future-proofing your infrastructure.
• Compliant with RoHS and TIA/EIA-568-C.3 standards for assured interoperability.

Specifications

• Cable Type: Fiber Optic Patch Cable, Duplex
• Fiber Mode: Single-Mode OS2
• Core/Cladding Diameter: 9µm / 125µm
• Connector A: LC Duplex UPC
• Connector B: LC Duplex UPC
• Cable Length: 15 m
• Jacket Color: Yellow
• Jacket Material: LSZH
• Insertion Loss (Typical): < 0.3 dB per connector
• Return Loss (Typical): > 50 dB
• Attenuation: < 0.4 dB/km @ 1310nm, < 0.3 dB/km @ 1550nm
• Operating Temperature: -20°C to +70°C
• Minimum Bend Radius: 30 mm
• Compliance: RoHS, TIA/EIA-568-C.3

Tips

When routing this cable, avoid exceeding the 30mm bend radius—especially near connectors—to maintain optimal signal quality. For permanent installations, use cable managers or raceways to protect the LSZH jacket. Always inspect and clean LC connectors before mating to prevent contamination-related loss.