Liiketunnistin Steinel IS 3360-R COM1 IP44 360° tunnistus, malli 033453

Steinel IS 3360-R COM1 is a 360° motion sensor designed for presence detection and automatic control of lighting and electrical circuits. With an IP44 rating for splash resistance, it monitors movement around its installation point and activates connected systems when presence is detected. Intended for indoor and covered outdoor environments, the sensor supports energy-efficient operation by reducing unnecessary runtime of lights and devices.

Advantages

The sensor combines full 360° coverage with reliable presence detection, allowing consistent monitoring of surrounding areas. Its IP44 protection provides resistance to splashes, making it suitable for sheltered exterior locations as well as interior spaces. The device integrates easily into lighting and control systems to enable automatic switching and timed control, reducing manual intervention. Designed for practical installation, it offers adjustable sensitivity and detection range to fit various mounting positions and room layouts.

Suitable for

• Corridors, stairwells and entrance halls
• Covered porches, garages and carports
• Utility rooms, storage areas and service spaces
• Office zones and shared spaces requiring automatic lighting

Key specifications

• Detection angle: 360° coverage for omnidirectional presence sensing
• Protection class: IP44 for splash and spray resistance
• Detection range: adjustable to suit mounting height and room layout
• Functionality: presence detection for automatic switching and timed control
• Mounting: designed for ceiling or wall installation in indoor and covered outdoor areas

How to use

Install the Steinel IS 3360-R COM1 according to mounting recommendations for the chosen ceiling or wall location, ensuring the sensor has clear line of sight of the monitored area. Connect the sensor to the lighting or control circuit following applicable electrical standards and wiring diagrams. Adjust sensitivity and time settings to match occupancy patterns: reduce sensitivity for high-traffic areas to avoid false triggers, increase detection range for larger rooms. Verify operation by walking through the detection zone and observing automatic switching behaviour.

Recommendations

Select mounting height and orientation to maximise 360° coverage while avoiding direct exposure to weather in outdoor installations. For energy optimisation, combine presence detection with appropriate time delay and daylight linking where available. Regularly inspect the sensor and clean the housing from dust or debris to maintain reliable detection performance.