Lindy 1 m Cat.6 U/UTP -verkkokaapeli, harmaa

Network Cable Lindy 1m RJ-45 Cat6 Grey is a 1 metre Cat.6 U/UTP PVC cable with RJ-45 connectors designed for data transmission up to 250 MHz and Ethernet speeds up to 1GBase-T. The cable conforms to ISO/IEC 11801 and is supplied individually in a polybag. Gold-plated contacts and a snagless connector design provide reliable, corrosion-resistant connections and protect the connector latch during installation and removal.

Advantages

This Cat.6 U/UTP cable supports operating frequencies up to 250 MHz and is suitable for Gigabit Ethernet due to its optimized electrophysical parameters (NExT, FExT, etc.) despite being unshielded. Gold-plated contacts reduce corrosion and maintain signal integrity over time. The snagless strain relief prevents damage to the connector latch, improving durability during repeated plug/unplug cycles. The product is manufactured and tested according to ISO/IEC 11801 standards and comes individually packaged.

Suitable for

• Home and office Ethernet connections
• Connecting network devices supporting 10/100/1000Base-T(X)
• Patch panels, switches and routers within structured cabling systems

Key specifications

• Length: 1 m
• Connector type: RJ-45 to RJ-45
• Cabling category: Cat.6 U/UTP
• Operating frequency: up to 250 MHz
• Supported Ethernet: up to 1GBase-T (10/100/1000Base-T(X))
• Color: Grey
• Standards: ISO/IEC 11801

How to use

Connect one RJ-45 end to your network device (PC, switch, router or patch panel) and the other end to the corresponding network port. Ensure connectors are fully inserted until the latch engages and route the cable without sharp bends. For best performance, avoid running the cable parallel to high-voltage power lines and maintain recommended bend radius for Cat.6 cables.

Recommendations

For reliable Gigabit performance, use this Lindy Cat.6 cable for short to medium runs (such as within rooms, between racks or to wall outlets) and replace damaged cables or connectors to preserve signal quality.