Mid-Tower-tietokonekotelo HYTE X50 Pitch musta

HYTE X50 Pitch Black is a mid-tower PC case designed for standard ATX, micro-ATX and mini-ITX desktop builds. The case combines a ventilated design with acoustic laminated glass and a structured PSU canopy to support common cooling configurations, multiple drive bays and tidy cable routing while maintaining a balance between airflow and noise damping.

Advantages

The full-coverage micro-mesh front serves as a low-pressure, low-resistance air intake for improved temperatures and reduced noise. Patent-pending louvered blade ventilation reduces exhaust impedance by channeling hot air out of the chassis while adding rigidity to the structure. A 4 mm laminated acoustic glass panel increases passive noise damping and uses a shatter-resistant bonding layer to help prevent dangerous splintering. The cold-floor cooling layout supports up to three 120 mm extra-thick fans to deliver direct airflow to the graphics card. The structural PSU canopy offers convenient cable management with multiple tie-down points and included Velcro straps for inside and outside routing.

Suitable for

• Gaming PC builds requiring strong GPU cooling
• Content creation workstations with multiple drives and expansion cards
• General-purpose desktop systems where noise reduction and airflow are both needed

Key specifications

• Form factor: Mid-tower
• Motherboard support: ATX, micro-ATX, mini-ITX
• Front intake: Full-coverage micro-mesh
• Ventilation: Patent-pending louvered blade exhaust
• Side panel: 4 mm laminated acoustic glass with shatter-resistant bonding
• Cooling support: Up to 3x 120 mm extra-thick fans on the lower/graphics area (cold-floor configuration)
• PSU: Structural PSU canopy with tie-down points and included Velcro straps
• Brand/Model: HYTE X50 Pitch Black (MPN: CS-HYTE-X50G-BB, EAN: 1220000352520)

How to use

Install your chosen motherboard inside the mid-tower case on the standoffs provided, route power and data cables through the structural PSU canopy, and secure components using the included screws and tie-down points. Fit up to three 120 mm fans in the cold-floor area to direct airflow toward the graphics card, mount drives in the available bays and connect front I/O to the motherboard header. Close the laminated glass panel carefully and use the external Velcro straps if additional external cable management is required.

Recommendations

For best thermal performance, combine the full-coverage micro-mesh intake with at least two exhaust fans using the louvered vents. When transporting the system or performing maintenance, remove the glass panel and handle it by the edges; the laminated acoustic glass reduces splintering risk but should still be treated with care. Use the included Velcro straps to keep cables secured and airflow unobstructed.