Mikrofonikaapeli Omnitronic 2×0,22 mm 100 m musta

Omnitronic 2×0.22 mm microphone cable in a 100 m black jacket is a shielded audio cable designed for transmitting low-level microphone signals over long runs. The cable features two conductors with a cross-sectional area of 0.22 mm² and an overall shield to reduce electromagnetic interference and maintain signal integrity in live sound, studio, and PA installations.

Advantages

The shielded design minimizes hum and radio-frequency interference, helping preserve clear audio with low noise. The two-conductor configuration is suitable for balanced microphone connections, reducing susceptibility to external noise on long cable runs. The 100 m length and flexible black jacket provide practical routing options for stage, rehearsal, and installation use while offering durability for repeated handling.

Suitable for

Key specifications

How to use

Route the cable between the microphone and the receiving device, keeping it away from power cables and strong sources of electromagnetic interference where possible. Use balanced connectors (XLR or TRS as appropriate) at both ends to maintain the cable’s noise-rejection properties. When cutting to length or terminating the cable, strip the outer jacket and shield carefully to preserve the shield continuity and avoid shorting the conductors; solder or crimp connections should be made following standard audio wiring polarity conventions.

Recommendations

For best results in live and installed systems, avoid running the cable parallel to mains power lines, keep cable bundles tidy with gentle bends, and secure terminations to prevent strain. Regularly inspect the jacket and connectors for wear and replace the cable if shield integrity is compromised.