Reikäsaha Bachmann 931.900

The Bachmann 931.900 drill hole saw is designed for installing TWIST fittings and for cutting clean holes in wood and plastic. With a cutting depth up to 60 mm and a diameter of 10.5 cm, this single-piece hole saw is suitable for various DIY and professional tasks where precise round openings are required.

Advantages

This hole saw provides a stable, single-piece construction that reduces vibration during cutting and improves durability. It is optimized for use with TWIST installation systems and produces clean edges in wood and plastic materials. The tool’s 60 mm maximum cutting depth allows for deeper penetrations compared with shallow hole saws.

Suitable for

• Coring holes for TWIST fittings
• Cutting round openings in wood
• Cutting round openings in plastic
• DIY installations and repair work

Key specifications

• Brand: Bachmann
• Model / MPN: 931.900
• EAN: 4016514063789
• Diameter: 105 mm (10.5 cm)
• Maximum cutting depth: up to 60 mm
• Material suitability: wood, plastic

How to use

Mount the hole saw on a compatible TWIST arbor or drill adapter according to the arbor manufacturer’s instructions. Secure the workpiece and mark the center point, then start drilling at low speed to establish the cut. Apply steady, even pressure and increase speed as appropriate for the material. After cutting, clear debris and inspect the hole for clean edges.

Recommendations

Use appropriate personal protective equipment (safety glasses and gloves). For best results in wood, use moderate drill speed and avoid excessive feed pressure; in plastic, reduce speed to minimize melting. Ensure the arbor and drill are suitable for the 105 mm hole saw and the required cutting depth.