SENCOR SLA 302 A3 laminointilaite, malli SLA 302, tukee A3, kalvokoot 2x75–2x125 mm

SENCOR SLA 302 is an A3 personal laminator for hot lamination of documents, photos and prints up to A3 size. It accepts pouches with total thickness from 150 to 250 microns (2x75–2x125 µm), offers a fast warm-up and a steady two-roller feed for consistent results in office or home use.

Advantages

The laminator heats up in approximately 2–4 minutes and operates quietly thanks to its two-cylinder sliding system. It supports an inlet opening width of 330 mm and runs at a laminating speed of about 300 mm/min. The unit is compact and lightweight (430 × 110 × 66 mm, 1.2 kg) and uses 230 V / 50 Hz power with 160 W consumption. A standby indicator light simplifies operation.

Suitable for

• Certificates
• Photos and invitations
• Documents and prints
• Drawings, posters and maps
• Calendars and small signs

Key specifications

• Model: SENCOR SLA 302
• Format support: up to A3
• Pouch thickness: 150–250 microns (2×75–2×125 µm)
• Inlet width: 330 mm
• Warm-up time: 2–4 minutes
• Laminating speed: approx. 300 mm/min
• Power: 230 V / 50 Hz, 160 W
• Dimensions: 430 × 110 × 66 mm
• Weight: 1.2 kg

How to use

Insert the document centered into an appropriate pouch, align the sealed edge first and feed it into the laminator inlet. Allow the machine to warm up until the standby light indicates readiness, then feed the pouch steadily; the two-roller system will pull it through. After lamination, let the pouch cool flat for a short time before handling to avoid bending or fingerprints.

Recommendations

For best results use clean, dry pouches within the specified thickness range (2×75–2×125 µm) and keep the laminator on a stable, flat surface. Do not laminate items that are heat-sensitive or contain flammable materials. If a jam occurs, consult the user manual and follow the manufacturer’s instructions for safe removal.