SFP+-lähetin-vastaanotin BlueOptics 5562A-Z 10000 Mbit/s 1310 nm

The BlueOptics 5562A-Z is an SFP+ fiber optic transceiver module engineered for 10 Gbit/s connectivity. Operating at a wavelength of 1310 nm, this compact hot-pluggable module supports high-speed data transmission over single-mode fiber links. It is intended for use in switches, routers and media converters that accept SFP+ modules and require reliable 10 Gbit/s optical uplinks or connections between network devices.

Advantages

The module provides a standardized SFP+ interface for easy integration into compatible networking equipment, enabling straightforward installation and replacement. Its 1310 nm operating wavelength is well suited for longer-reach single-mode fiber links, delivering stable performance at a 10000 Mbit/s transfer rate. The compact form factor and hot-pluggable design reduce downtime during upgrades or maintenance.

Suitable for

• 10 Gbit/s uplinks between switches and routers
• Single-mode fiber connections requiring 1310 nm wavelength
• Data center server connections and aggregation links
• Media converters and transceiver-capable network appliances

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Operating wavelength: 1310 nm
• Form factor: small form-factor pluggable (SFP+), hot-pluggable
• Optical fiber type: single-mode (recommended for 1310 nm links)

How to use

Install the BlueOptics 5562A-Z by inserting the SFP+ module into a compatible SFP+ port on a switch, router or media converter until it latches. Connect an appropriate single-mode fiber cable with matching connectors and verify link status through device LEDs or management interface. The module is hot-pluggable, so it can be inserted or removed without powering down supported equipment; follow your device vendor's guidelines for safe insertion and removal and allow the interface to negotiate link parameters after connection.

Recommendations

Use single-mode fiber rated for 1310 nm to achieve optimal reach and signal integrity. Verify compatibility with the host device's supported SFP+ modules and firmware. When installing or removing the transceiver, handle it by the housing to avoid contact with the optical interface, and keep dust caps on unused ports.