SFP+-lähetin-vastaanotinmoduuli BlueOptics AOC-E10GSFPLRM-BO 10000 Mbit/s

The BlueOptics AOC-E10GSFPLRM-BO 10000 Mbit/s SFP+ transceiver module is a fiber optic active optical cable (AOC) interface designed for high-speed network links. The module supports a maximum data transfer rate of 10 Gbit/s over SFP+ connections and is supplied in a nickel-colour housing. With an MTBF of 1,000,000 hours, this transceiver is built for continuous operation in data centres, server rooms and network closets and is compatible with Supermicro AOC-E10GSFPLRM.

Advantages

The SFP+ form factor and 10 Gbit/s throughput enable compact, high-performance links between switches, servers and storage equipment without the need for separate optical transceivers and fiber connectors. The AOC design simplifies installation by integrating the optical cable and transceiver while reducing signal conversion points. A nickel-colour housing provides durable mechanical protection and the specified MTBF indicates long operational life under normal conditions.

Suitable for

• 10 Gbit/s uplinks between switches and routers
• Server-to-switch connections in data centres and rack environments
• High-throughput links for storage area networks (SANs)
• Short- to medium-reach optical connections where SFP+ AOC is supported

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Form factor: SFP+ active optical cable module
• Product colour: Nickel
• Weight: 0.02 kg
• MTBF: 1,000,000 hours

How to use

Install the BlueOptics SFP+ transceiver into the SFP+ slot of a compatible switch or server until it latches. Connect the integrated optical cable end to the corresponding SFP+ port on the remote device. Ensure both devices support SFP+ AOC modules and the required 10 Gbit/s link speed. Verify link status in the device management interface and adjust port settings (speed, duplex, or auto-negotiation) as needed. Follow standard electrostatic discharge (ESD) precautions when handling the module.

Recommendations

Use the transceiver with equipment that explicitly supports SFP+ AOC modules and the required vendor compatibility list when available. Keep the module and cable free from excessive bending or mechanical strain, operate within recommended temperature ranges of host devices, and verify firmware or driver compatibility on network equipment to ensure stable 10 Gbit/s links.