Verkkokaapeli LogiLink 5 m Cat.6 RJ-45 S/FTP vihreä

LogiLink Cat.6 S/FTP patch cable, 5.00 m, green — a shielded networking cable designed for reliable Ethernet connections. It features RJ45 connectors on both ends, bare copper conductors and an LSZH (low smoke zero halogen) outer jacket. The cable construction (S/FTP PIMF, AWG 27/7) and compliance with ISO/IEC 11801, EN50288 and TIA/EIA 568-B.2-1 standards provide consistent performance for structured networks and device interconnections.

Advantages

The S/FTP (shielded/foiled twisted pair) PIMF design reduces electromagnetic interference and crosstalk, improving signal integrity over the 5 m length. Bare copper conductors and RJ45 terminations ensure reliable electrical contact, while the LSZH jacket limits smoke and toxic gas emission in case of fire. The cable is lightweight (approx. 160 g) and comes in a distinct green color for easy identification in cable runs.

Suitable for

• Connecting computers, switches and routers within offices or home networks
• Structured cabling runs where Cat6 performance and shielding are required
• Audio/video installations and PoE devices up to Cat6 specifications

Key specifications

• Cable category: Cat.6
• Shielding: S/FTP (overall braid + foil over each pair, PIMF)
• Conductor: bare copper, AWG 27/7
• Connector: RJ45 — both ends
• Length: 5.00 m
• Jacket: LSZH (low smoke zero halogen)
• Weight: approx. 0.16 kg
• Standards: ISO/IEC 11801, EN50288, TIA/EIA 568-B.2-1

How to use

Uncoil the LogiLink Cat.6 S/FTP patch cable and connect the RJ45 connectors into the Ethernet ports of your devices (computer, switch, router or modem). Ensure connectors are fully inserted until they click. Route the cable to avoid sharp bends and strong mechanical stress; maintain proper separation from high-voltage power lines to minimize interference despite shielding.

Recommendations

For optimal performance, use this Cat.6 S/FTP cable for short to medium runs (up to 5 m) within racks or between nearby devices. Avoid excessive bending near the connector boots and secure the cable with cable ties without compressing the jacket to preserve shielding and conductor integrity.