Lyijyakku suljettu Goobay GO12-7.2 7200 mAh 12 V

The Goobay GO12-7.2 is a sealed lead acid battery rated at 12 V and 7200 mAh capacity. Designed for standby power and portable equipment, this maintenance-free battery uses a valve-regulated sealed design that prevents leakage and allows installation in various orientations. The compact housing and Faston (4.8 mm) connectors enable straightforward replacement or integration into existing systems.

Advantages

This sealed lead acid battery offers stable voltage output and dependable capacity over repeated charge-discharge cycles. Its sealed, maintenance-free construction reduces the need for servicing and lowers the risk of electrolyte spills. The Faston connector system simplifies electrical connection and replacement without the need for special tooling. The battery’s compact dimensions and moderate weight make it easier to handle and install in constrained spaces.

Suitable for

• Uninterruptible power supplies (UPS) and backup power modules
• Alarm and security systems
• Emergency lighting and signage
• Portable test equipment and small electric devices
• Hobby and DIY electronics requiring 12 V standby power

Key specifications

• Nominal voltage: 12 V
• Capacity: 7200 mAh (7.2 Ah)
• Battery chemistry: sealed lead acid (valve-regulated)
• Terminal type: Faston 4.8 mm
• Weight: approximately 2.05 kg
• Dimensions (approx.): width 65 mm, height 101 mm
• Maintenance: maintenance-free, no topping up required

How to use

Before installation, ensure the device is powered down and disconnected from mains supply. Connect the battery using compatible Faston 4.8 mm female connectors, observing correct polarity. Place the battery in a well-ventilated, dry location away from direct heat sources and corrosive materials. Charge the battery with a charger suitable for sealed lead acid batteries following the manufacturer’s recommended charging voltage and current limits. For best results, perform a full charge after first installation and follow regular charge maintenance if used in standby systems.

Recommendations

Store and operate the battery within recommended temperature ranges and avoid deep discharges to prolong service life. Use a charger with float/standby charging mode for standby applications and replace the battery when capacity falls below required backup time. Dispose of the battery according to local regulations for lead-acid batteries.