Syväpumppu Metabo 600975000

The Metabo 600975000 is a positive displacement water pump designed for garden irrigation and water supply tasks. It features a 1300 W motor that provides steady delivery and is intended for outdoor use where reliable water transfer, pressure and head are required. Constructed with stainless steel components and a robust housing in black and green, the pump offers corrosion resistance and mechanical durability. The unit runs on AC mains (220–240 V) and is rated IPX4 for protection against water splashes during normal operation.

Advantages

The pump provides a high maximum flow rate of up to 6000 l/h while maintaining a working pressure of up to 5.5 bar and a delivery head up to 55 m, enabling consistent water supply over long distances and elevations. The 1300 W motor delivers stable performance under varying load conditions. Materials selected for the wet end and external casing improve longevity in garden and outdoor environments. The IPX4 ingress protection helps protect electrical components from splash water during use.

Suitable for

• Garden irrigation systems for lawns, flower beds and vegetable plots
• Water transfer from wells, cisterns or tanks to domestic supply or irrigation points
• Filling and emptying rainwater barrels and storage tanks
• Boosting static water pressure for sprinklers and hoses

Key specifications

• Motor power: 1300 W
• Maximum flow rate: 6000 litres per hour
• Maximum pressure: 5.5 bar
• Maximum delivery head: 55 m
• Power supply: AC 220–240 V
• Protection class: IPX4 (splash resistant)
• Construction materials: stainless steel wet parts and durable housing
• Colour: black and green

How to use

Install the pump on a stable, level surface near the water source with adequate ventilation and protected from prolonged direct weather exposure. Connect the suction and discharge hoses or piping according to the pump’s connection sizes, ensuring airtight joints and correct orientation to prevent air leaks. Connect the pump to a properly grounded 220–240 V AC supply and switch the unit on following the manufacturer’s start-up sequence; do not run the pump dry. Monitor pressure and flow after start-up and check for leaks or unusual noise. Follow regular maintenance intervals for cleaning filters and inspecting seals.

Recommendations

Use hoses and fittings rated for the pump’s maximum pressure and flow. Protect the pump from freezing temperatures and avoid prolonged exposure to rain or standing water despite its IPX4 rating. For long service life, ensure the suction line is free of air leaks, keep inlet strainers clean and perform periodic inspection of seals and fastenings.